We are using our SSD test bed for these drives for consistency purposes. To make all of our mSATA SSD series drives work in the platform we are using a nice Syba mSATA to 2.5″ SATA converter.
- Processor: Intel Xeon E3-1275 V3
- Motherboard: Supermicro X10SAE (Intel C226 based)
- Boot SSD: Samsung 840 Pro 256GB boot drive
- RAM: 32GB DDR3 ECC 1600MHz 4x 8GB UDIMMs
We are not testing these drives on our LSI SAS controller configuration for a simple reason: the mSATA form factor is unlikely to be utilized with LSI controllers in end-user systems.
The MyDigitalSSD BP4 128GB mSATA SSD
The MyDigitalSSD BP4 drive we are looking at here is the 50mm mSATA model. Dimensions are important for these drives as one does need to select a drive with the proper dimensions.
We peeled back the large sticker on the MyDigitalSSD BP4 drive and saw an interesting configuration. There is a Phison PS3109-S9 four channel NAND controller onboard. The two NAND packages one can see are Toshiba 19nm Toggle NAND.
On the rear of the SSD we can see two more Toshiba NAND packages. 128GB of flash in four packages means we have 32GB of flashin each package. The Nanya chip is RAM which is common on today’s higher performance SSDs.
MyDigitalSSD sets aside 8GB for spare area. As a result, this is essentially a 120GB drive before formatting.
MyDigitalSSD BP4 Benchmarks
It is important, especially with SSDs not to take a single test result at face value. One should look at a few different tests to get an idea of how the drives perform in different scenarios. To this end, AS SSD benchmark, CrystalDiskMark, ATTO all show different facets of performance.
AS SSD Benchmark
AS SSD is a solid benchmark that does not write compressible data to drives. The result is perhaps one of the best workstation SSD benchmarks available today.
Here we see some decent performance from the Bullet Proof 4 drive. Sequential read speeds of 500MB/s and 4K-64 thread results of 190MB/s are very strong for a $75 SSD.
CrystalDiskMark is another benchmark which gives non-compressible read/write numbers. This is in contrast to the ATTO Benchmark used by LSI/ Sandforce and its partners when they market a given solid state drive.
Overall read and write speeds are similar to what we saw with AS SSD. These are easily enough to saturate gigabit Ethernet links. Again wee see high queue depth 4K and sequential read speeds are fairly high on the BP4. Write speeds are a bit higher than we saw with AS SSD.
The value of the ATTO benchmark is really to show the best-case scenario. ATTO is known to write highly compressible data to drives, which inflates speeds of controllers that compress data like LSI/ SandForce does prior to writing on a given solid state drive.
ATTO provides an interesting view on what is going on here. With highly compressible ATTO writes, the Phison controller can achieve over 500MB/s write and 540MB/s read speeds. With the M.2 PCIe SSDs we are going to see a bigger jump in performance, but for now this is very solid for a SATA III drive.
For those running HTPC, ESXi or Hyper-V server builds on platforms such as the Intel NUC series or Supermicro X10SBA this is a very interesting mSATA boot device. It has plenty of speed to saturate SATA III links and send/ receive data over the network. For the price, these are very interesting options. See here for the drives on Amazon.