With over 17 years of IT hardware supply chain resources



If you read our piece on the Intel Xeon E-2100 launch SKUs and Value Analysis you will note that we see this as a major evolution from the previous year’s SKU launches. Since the Intel Xeon E3 branding is being replaced by the new Intel Xeon E-2100 (E is for Entry-Level in this case.) We decided to take an opportunity to look back at the Intel Xeon E3-1200 series history and see how each generation was launched. e7-8830

Background: Previous Generation Intel Xeon E3-1200 Launch SKUs

We are going to look at the major launches and in most cases not cover the later mobile Xeon E3 launches nor most of the refreshes. Intel tends to add SKUs over time, but we wanted to focus on the major launch cycles.

In the Beginning: Intel Xeon E3-1200

The Intel Xeon E3-1200 is now often referred to with a “V1” but it is the first Intel Xeon E3 series before the “V” nomenclature was commonplace. This was based on the Sandy Bridge core and featured 2-4 cores and 20-95W TDP. Of the 11 launch SKUs, five had integrated graphics. We pulled this from our Intel Xeon E3-1230 Sandy Bridge Benchmarks and Review.

2011 Intel Xeon E3-1200 Series Lineup

This was a huge upgrade over the previous Xeon X3400 (Lynnfield) series CPUs as it moved to the Sandy Bridge architecture. One was still limited to 16GB of DDR3 (UDIMM) or 32GB of DDR3 RAM (RDIMM), but it was a big deal at the time. Sandy Bridge Xeon E3-1200 parts could use less expensive DDR3 UDIMMs to hit 32GB. They also introduced the iGPU in this class of servers for the first time. If you look at what was happening on the consumer side, this is about when Intel started its iGPU campaign. Intel took the consumer CPU die, enabled ECC memory support and changed a few features to create the Xeon part.

Intel Xeon E3-1220

One must remember that AMD Opteron was still a major server player at this point, virtualization saturation was lower, and Sandy Bridge helped Intel cement the market from competitors.

Intel Xeon E3-1200 V2 Ushers in Ivy Bridge

In 2012 the Intel Xeon E3-1200 V2 line based on Ivy Bridge came out. This was notable because it was the first generation 22nm product in this segment. It was also the first introduction to PCIe Gen3 in this line as the first generation E3’s still used PCIe Gen2.

Intel Xeon E3-1200 V2 Series Lineup 2012 – Ivy Bridge Edition

Here we saw four of the eleven SKUs launch with Intel HD graphics. Going back in STH history, yes we had an Intel Xeon E3-1230 V2 Ivy Bridge Xeon Review 4C/8T 3.3GHz.

The transition to PCIe 3.0 was important in servers because it was the transition that allowed significantly faster RAID controllers, NICs and other devices. When you are in the low end of the market like with the Xeon E3 line, you have limited PCIe lanes so effectively doubling the performance of a lane goes a long way. Six years later, the new Intel Xeon E-2100 is still using PCIe Gen3 which is constraining modern servers.

The Pinnacle: Intel Xeon E3-1200 V3 Haswell

Haswell came around in 2013 and our Intel Xeon E3-1200 V3 Series Compute Value Comparison broke down the SKU stack again. One of the big features was moving a lot of the voltage regulation onto the die which means that TDP pre and post-Haswell are not a direct comparison. We discussed this change in our reviews of the day. You can see, this is about when we started doing value analysis at STH:

Intel Xeon E3-1200 V3 Value Comparison

With Haswell, there were three low power SKUs, two with GPUs. In total there were twelve launch SKUs, half of which had integrated GPUs. Haswell was not done, however.

The V3 generation broke a huge portion of the market for AMD. In late 2012 we covered AMD Opteron 4300 and Opteron 3300 Series Server CPUs Launched. STH was the only site to benchmark and review the AMD Opteron 3300 series. AMD Opteron 3380 Review. By the time we were doing that review, AMD was telling us that they were “not intended to compete with Intel on a performance basis” and “only for value-conscious European dedicated hosting customers.”

This week we published our AMD EPYC 7551P Benchmarks and Review A 32 Core Value Monster piece. My how the tables have turned!

The Missing Generation: Intel Xeon E3-1200 V4

The Intel Xeon E3-1200 V4 series was delayed to the point that Intel essentially skipped the generation for mainstream servers and workstations. Instead, in 2014 we got a refresh of the Xeon E3-1200 V3 series. You can read about that here 2014 Refresh: Intel Xeon E3-1200 V3 Value Comparison.

Haswell Intel Xeon E3-1200 V3 May 2014 Refresh

There were 11 refresh SKUs. Again there are three low power SKUs and six SKUs with iGPUs. Clock speeds were mostly up a nominal amount. This is all Intel had to do with no competition. Intel had such a stranglehold on the market with Avoton and Rangeley at the low end (killing off the AMD Opteron A1100) and the Xeon E3-1200 V3 line that this nominal speed bump was all it needed. Broadwell was never a mainstream “Intel Xeon E3-1200 V4.” Even in 2014 when this was all Intel needed to do, we posited that Intel can hold ARM (largely) out of the data center for 3 years. It took 4 years and now the Cavium ThunderX2 is a Real Arm Server Option.



Intel Xeon E3-1200 V3 Box

The Intel Xeon E3-1200 V3 refresh essentially made the 22nm generation last from Q2 2012 to Q4 2015. Just looking at the V3 generation that was Q2 2013 to Q4 2015. There are very few segments and competitive situations where a 100MHz speed bump can satisfy a market for two and a half years.

The other major happening during the V3’s reign was Xeon D. The Intel Xeon D-1500 series launched in Q1 2015 and set off now two series of CPUs. Here is the summary of that in Exploring Intel Xeon D Evolution from Xeon D-1500 to Xeon D-2100

The next big change happened in late 2015 and it was a big one. We are going to cover that on the next page along with the new Xeon E-2100.



Leave a message